Kenwood DMX8021DABS 7-inch Wireless CarPlay & Android Auto Stereo

Kenwood DMX8021DABS 7-inch Wireless CarPlay & Android Auto Stereo

£578.84 inc VAT

Supply only: £578.84 including VAT.

Wireless or wired Apple CarPlay and Android Auto. Optional Swansea workshop installation: add 2 hours labour (£192 including VAT) using the dropdown. Subject to vehicle compatibility and installation circumstances; vehicle-specific fitting parts and additional work are quoted separately.

Installation

Optional Swansea workshop installation: 2 hours labour (£160 + VAT / £192 including VAT). Subject to vehicle compatibility and installation circumstances. Required fitting kits, interfaces and additional work are priced separately and agreed before proceeding.

  • Installation option *

  • Adds £48 including VAT (£40 excluding VAT) for 0.5 hour of DAB aerial fitting. Labour only. Aerials, adapters and other hardware are charged separately unless expressly included in the selected product or option. Available with standard Swansea workshop installation of equipment supplied by Lehane Autos, subject to vehicle compatibility and condition. We do not fit customer-supplied parts. Any additional diagnostics, parts or labour will be explained and agreed before proceeding.

Optional Kenwood integrated dashcam

Add the Kenwood DRV-N520 for compatible receiver-screen control and recording playback. Camera hardware only; professional wiring and receiver setup are required and fitting is quoted separately. The camera uses the receiver’s dashboard-camera video/interface connections. Check camera-input allocation before combining it with another front camera, especially on DNX7190DABS and DNX9190DABS.

  • Add Kenwood DRV-N520 dashcam *

    Optional camera hardware for this exact Kenwood receiver model. Supplied power harness requires ground, switched accessory and constant battery power. Configure the receiver’s dashboard-camera input. Camera fitting is separate from any standard stereo-installation option.

Optional Kenwood HDMI connection cable

  • Add a Kenwood HDMI cable *

    Optional KCA-HD200 1.8m cable for this receiver's micro-HDMI Type D input, with a standard HDMI Type A plug at the source end. One cable per receiver when selected. A compatible HDMI source and any phone-specific HDMI adapter are required separately; this cable is not a USB adapter and does not guarantee phone mirroring or streaming-app support. Follow the receiver instructions and refit its HDMI cable retaining fixture. Hardware only: any cable routing or installation is quoted separately and is not added by this option. We fit equipment supplied by Lehane Autos, not customer-supplied parts.

Add a reversing camera for this Kenwood receiver?

Optional camera hardware for this receiver. Choose one camera or No camera. Kenwood lists CMOS-230 and CMOS-320 for this receiver. Any vehicle-specific option is an additional aftermarket camera and must match your exact vehicle and body style. Receiver video compatibility does not confirm vehicle fitment or retain an original factory camera. Mounting, cable routing and length, suitable power, reverse trigger and any adapters must be checked for your vehicle. Camera installation is separate from stereo installation and is quoted and agreed before work. Parksafe PSC30: selected Fiat Ducato, Peugeot Boxer and Citroën Relay from 2006, or Vauxhall Movano from 2021, only when the original brake-light housing, mounting, connectors and actual body/door style match. No blanket conversion, chassis-cab, motorhome or later-facelift fit is promised. Parksafe PSC45: selected VW Caddy 2013–2020 with the matching original brake-light assembly, barn-door or tailgate configuration. Not the new-generation Caddy 5. A model year alone is insufficient; supply original brake-light and rear-door photographs for confirmation. This selector adds camera hardware only, not the standalone camera product’s optional fitting service. Camera fitting, mounting, wiring and any additional parts are quoted separately; existing stereo installation is not charged twice. Lehane fits only equipment it supplies; customer-supplied parts are not accepted.

  • Optional reversing camera for this Kenwood receiver *

    CMOS-230 and CMOS-320 use standard NTSC composite video. For the two Parksafe vehicle-specific cameras, match the exact application and original lamp assembly in the group description. For either Parksafe option, use standard D1/CVBS NTSC output through its supplied 10 m four-pin/RCA connection route. The camera requires a suitable separately protected 12 V DC supply and ground and draws 0.3 A. RCA carries video only; do not connect to a 24 V or low-voltage OEM camera supply, or assume an arbitrary four-pin pinout. Do not power directly from a CAN-bus-monitored reversing-lamp circuit. An installer must verify suitable isolated power, any required relay/interface, the separate reverse-trigger signal, safe cable routing and cable length. Extra power/trigger parts are not automatically included. Preserve correct brake-light operation and seals, and test the image and reverse activation with the engine off and running. No AHD or HD-TVI mode is offered. This selector adds camera hardware only, not the standalone camera product’s optional fitting service. Camera fitting, mounting, wiring and any additional parts are quoted separately; existing stereo installation is not charged twice. Lehane fits only equipment it supplies; customer-supplied parts are not accepted.

  • Vehicle and camera installation requirements *

    Please state the vehicle make, model, year and body style, proposed camera mounting position and any known cable-routing obstacles. Tell us whether you need hardware supply only or a separate camera installation quotation. We must confirm vehicle suitability before fitting. For PSC30 or PSC45, include production month/year, rear-door style and clear photographs of the original brake-light housing, mountings and connectors. Confirm there is no original camera being retained. State vehicle electrical voltage and any known monitored-lamp/power-routing issue; camera power and reverse activation need separate installer verification.

  • The selected price is camera hardware only. Receiver compatibility is not a guarantee of vehicle fitment. Any camera installation, mounting, wiring or adapters must be checked, quoted and agreed separately before work. For PSC30 or PSC45 I understand that the exact original brake-light assembly must match, the standard NTSC output and separately suitable 12 V power/reverse trigger must be verified, and no factory-camera retention or HD upgrade is included. The camera’s standalone fitting option is not selected by this hardware choice. Customer-supplied parts are not accepted.

Optional Ford fitting components — compatibility confirmation required

Optional components, not a complete installation package. Choose no kit for other vehicles. CTKFD88 is for selected Transit V363 2015–2021; CTKFD92 for selected Transit Custom V362 2013–2021, both WITHOUT an original factory display. Matching dashboard, radio, connectors, mounting/trim arrangement, rear clearance and factory equipment must be confirmed before ordering. Suitable working hazard/door-lock controls and the correct airbag-indicator/trim arrangement must be present. Assess whether original parts can be safely reused; buy replacements only when necessary. Never remove or replace a required airbag warning lamp with a card holder. DAB aerial provision is separate where supported/required by the selected stereo. Kit prices cover components only. Any installation option selected for the stereo remains separate and subject to its stated scope; additional parts or work are quoted separately.

  • Optional Ford fitting components *

    Choose only the verified kit for your vehicle. These components are not a complete installation package. Suitable working hazard/door-lock controls and the correct safety-indicator/trim arrangement must be present; assess safe reuse of original parts before buying replacements. DAB provision where supported/required by the selected stereo, and configuration-dependent interfaces, may be extra. Both kits include an analogue steering-control interface and CTMULTILEAD.2 patch lead. The installer must configure the included lead for the exact receiver brand/model and connect it according to the actual manuals BEFORE powering the interface. Pioneer jack, JVC Key1 and Kenwood Key1 configurations differ; do not carry one brand configuration into another. Follow the official CTMULTILEAD.2 guide: https://downloads.connects2.com/C2/files/InstallationGuides/CTMULTILEAD.2.pdf . No universal factory camera, amplifier, USB or other function retention is promised. Confirm exact mounting, trim and rear depth/ventilation clearance. Mounting is model-specific: sleeve/tabs, reduced rear chassis, deeper CD units, side brackets, permitted screw lengths and screw supply must be checked against the exact receiver installation manual; fascia compatibility alone does not confirm hole alignment, trim flushness or clearance.

  • Vehicle and original audio details for compatibility confirmation *

    Enter vehicle model, production year, original radio/display, factory amplifier/camera and existing passenger-airbag indicator arrangement. Include your registration if helpful. We may request dashboard and connector photos before confirming fitment. Do not assume selection alone confirms compatibility.

  • Suitable working hazard/door-lock controls and the correct airbag-indicator/trim arrangement must be present. Original parts may be reused only where safe and compatible; replacements are needed only when necessary. Never remove or replace a required warning lamp with a card holder. DAB aerial provision, where supported/required by the selected stereo, and configuration-dependent interfaces may be extra. The patch lead is already included and must be configured for the exact receiver brand/model according to its guide before the interface is powered. Kit prices cover components only. Any installation option selected for the stereo remains separate and subject to its stated scope; additional parts or work are quoted separately. Factory camera, amplifier, SYNC, USB or other function retention is not guaranteed.

Find the right parts for your vehicle

Can't see your vehicle in the options on this page? Browse the categories below, then ask us to confirm the exact parts for your vehicle's make, model, year, dashboard, original radio and factory equipment. These are catalogue links, not a list of compatible parts. Do not add a component already included in a selected kit or option.

Product total

Options total

Grand total

SKU DMX8021DABS Category Brand:

Description

Kenwood DMX8021DABS 7-inch Wireless CarPlay & Android Auto Stereo

  • 7-inch capacitive touchscreen double-DIN media receiver
  • Wireless and wired Apple CarPlay and Android Auto
  • DAB+ digital radio, Bluetooth and compatible wireless Android mirroring
  • Support for up to four cameras, using the switchable AV input for the fourth camera, and three 5V RCA pre-outs
  • DSP, 13-band equaliser and time alignment. Cameras and vehicle-specific interfaces are separate

Check your vehicle before ordering

This is an aftermarket head unit, not a vehicle-specific plug-and-play kit. Your vehicle may require a fascia, wiring harness, aerial adapter, DAB antenna, steering-wheel-control interface, amplifier interface or camera-retention adapter. These are not included unless explicitly stated. Original factory functions are retained only where supported by the correct interface.

Professional installation

Select supply only or add Swansea workshop installation in the dropdown above. Installation adds 2 hours labour (£192 including VAT), subject to vehicle compatibility and installation circumstances. Vehicle-specific fitting kits, interfaces and any additional labour are separate; we will check and agree any extra charges before proceeding. Contact us with your vehicle make, model, year and existing stereo details to confirm the required parts.

Workshop collection or UK delivery is available at checkout. Smartphone functions depend on a compatible phone, current software and the required connection.

Compatible Kenwood reversing cameras

Choose one camera for each intended camera input. These are optional alternatives, not a requirement to buy every model. Do not add a separate camera if your chosen package already includes it. Camera mounting, required wiring or adapters and camera installation must be checked for the exact vehicle and receiver. These extras are separate unless expressly included; stereo fitting does not automatically include camera fitting.

Optional linked Kenwood dash camera

The Kenwood DRV-N520 is a compatible linked dash camera for this DMX8021DABS receiver. It records the road ahead and lets you view recordings and camera controls through the receiver. It is separate from a reversing camera and is not included with the stereo.

The installer must check the camera connections, input assignment, mounting and wiring. Do not purchase the separate dashcam listing if selected above. Camera installation and any required extra parts are separate from standard stereo fitting.

Optional Kenwood HDMI cable

The KCA-HD200 1.8m HDMI cable connects a suitable HDMI source to this receiver’s Type-D micro-HDMI input. Any device-specific AV adapter and USB cable are separate. This cable alone does not provide phone mirroring. Confirm your source device and required adapters before ordering, and do not add a second cable if your package already includes one.

UK base price: £578.84 including VAT (£482.37 excluding VAT). Selected options or extras may change the total.

Additional information

Phone connection

Wireless or wired