Kenwood DMX7722DABS 6.8-inch Wireless CarPlay & Android Auto Stereo

Kenwood DMX7722DABS 6.8-inch Wireless CarPlay & Android Auto Stereo

£433.04 inc VAT

Stereo price: £360.87 + VAT (£433.04 including VAT).

Wireless or wired Apple CarPlay and Android Auto.

Choose supply only or add standard Swansea workshop fitting below: £192 including VAT for a 2-hour labour allowance, subject to vehicle compatibility and installation circumstances. Optional DAB aerial fitting adds £48 including VAT (0.5 hour) with stereo fitting. Required additional parts and work beyond the standard allowance are separate and agreed before proceeding.

Add a reversing camera for this Kenwood receiver?

Optional camera hardware for this receiver. Choose one camera or No camera. Kenwood lists CMOS-230 and CMOS-320 for this receiver. Any vehicle-specific option is an additional aftermarket camera and must match your exact vehicle and body style. Receiver video compatibility does not confirm vehicle fitment or retain an original factory camera. Mounting, cable routing and length, suitable power, reverse trigger and any adapters must be checked for your vehicle. Camera installation is separate from stereo installation and is quoted and agreed before work. Parksafe PSC30: selected Fiat Ducato, Peugeot Boxer and Citroën Relay from 2006, or Vauxhall Movano from 2021, only when the original brake-light housing, mounting, connectors and actual body/door style match. No blanket conversion, chassis-cab, motorhome or later-facelift fit is promised. Parksafe PSC45: selected VW Caddy 2013–2020 with the matching original brake-light assembly, barn-door or tailgate configuration. Not the new-generation Caddy 5. A model year alone is insufficient; supply original brake-light and rear-door photographs for confirmation. This selector adds camera hardware only, not the standalone camera product’s optional fitting service. Camera fitting, mounting, wiring and any additional parts are quoted separately; existing stereo installation is not charged twice. Lehane fits only equipment it supplies; customer-supplied parts are not accepted.

  • Optional reversing camera for this Kenwood receiver *

    CMOS-230 and CMOS-320 use standard NTSC composite video. For the two Parksafe vehicle-specific cameras, match the exact application and original lamp assembly in the group description. For either Parksafe option, use standard D1/CVBS NTSC output through its supplied 10 m four-pin/RCA connection route. The camera requires a suitable separately protected 12 V DC supply and ground and draws 0.3 A. RCA carries video only; do not connect to a 24 V or low-voltage OEM camera supply, or assume an arbitrary four-pin pinout. Do not power directly from a CAN-bus-monitored reversing-lamp circuit. An installer must verify suitable isolated power, any required relay/interface, the separate reverse-trigger signal, safe cable routing and cable length. Extra power/trigger parts are not automatically included. Preserve correct brake-light operation and seals, and test the image and reverse activation with the engine off and running. No AHD or HD-TVI mode is offered. This selector adds camera hardware only, not the standalone camera product’s optional fitting service. Camera fitting, mounting, wiring and any additional parts are quoted separately; existing stereo installation is not charged twice. Lehane fits only equipment it supplies; customer-supplied parts are not accepted.

  • Vehicle and camera installation requirements *

    Please state the vehicle make, model, year and body style, proposed camera mounting position and any known cable-routing obstacles. Tell us whether you need hardware supply only or a separate camera installation quotation. We must confirm vehicle suitability before fitting. For PSC30 or PSC45, include production month/year, rear-door style and clear photographs of the original brake-light housing, mountings and connectors. Confirm there is no original camera being retained. State vehicle electrical voltage and any known monitored-lamp/power-routing issue; camera power and reverse activation need separate installer verification.

  • The selected price is camera hardware only. Receiver compatibility is not a guarantee of vehicle fitment. Any camera installation, mounting, wiring or adapters must be checked, quoted and agreed separately before work. For PSC30 or PSC45 I understand that the exact original brake-light assembly must match, the standard NTSC output and separately suitable 12 V power/reverse trigger must be verified, and no factory-camera retention or HD upgrade is included. The camera’s standalone fitting option is not selected by this hardware choice. Customer-supplied parts are not accepted.

Optional Ford fitting components — compatibility confirmation required

Optional components, not a complete installation package. Choose no kit for other vehicles. CTKFD88 is for selected Transit V363 2015–2021; CTKFD92 for selected Transit Custom V362 2013–2021, both WITHOUT an original factory display. Matching dashboard, radio, connectors, mounting/trim arrangement, rear clearance and factory equipment must be confirmed before ordering. Suitable working hazard/door-lock controls and the correct airbag-indicator/trim arrangement must be present. Assess whether original parts can be safely reused; buy replacements only when necessary. Never remove or replace a required airbag warning lamp with a card holder. DAB aerial provision is separate where supported/required by the selected stereo. Kit prices cover components only. Any installation option selected for the stereo remains separate and subject to its stated scope; additional parts or work are quoted separately.

  • Optional Ford fitting components *

    Choose only the verified kit for your vehicle. These components are not a complete installation package. Suitable working hazard/door-lock controls and the correct safety-indicator/trim arrangement must be present; assess safe reuse of original parts before buying replacements. DAB provision where supported/required by the selected stereo, and configuration-dependent interfaces, may be extra. Both kits include an analogue steering-control interface and CTMULTILEAD.2 patch lead. The installer must configure the included lead for the exact receiver brand/model and connect it according to the actual manuals BEFORE powering the interface. Pioneer jack, JVC Key1 and Kenwood Key1 configurations differ; do not carry one brand configuration into another. Follow the official CTMULTILEAD.2 guide: https://downloads.connects2.com/C2/files/InstallationGuides/CTMULTILEAD.2.pdf . No universal factory camera, amplifier, USB or other function retention is promised. Confirm exact mounting, trim and rear depth/ventilation clearance. Mounting is model-specific: sleeve/tabs, reduced rear chassis, deeper CD units, side brackets, permitted screw lengths and screw supply must be checked against the exact receiver installation manual; fascia compatibility alone does not confirm hole alignment, trim flushness or clearance.

  • Vehicle and original audio details for compatibility confirmation *

    Enter vehicle model, production year, original radio/display, factory amplifier/camera and existing passenger-airbag indicator arrangement. Include your registration if helpful. We may request dashboard and connector photos before confirming fitment. Do not assume selection alone confirms compatibility.

  • Suitable working hazard/door-lock controls and the correct airbag-indicator/trim arrangement must be present. Original parts may be reused only where safe and compatible; replacements are needed only when necessary. Never remove or replace a required warning lamp with a card holder. DAB aerial provision, where supported/required by the selected stereo, and configuration-dependent interfaces may be extra. The patch lead is already included and must be configured for the exact receiver brand/model according to its guide before the interface is powered. Kit prices cover components only. Any installation option selected for the stereo remains separate and subject to its stated scope; additional parts or work are quoted separately. Factory camera, amplifier, SYNC, USB or other function retention is not guaranteed.

Installation options

Optional Swansea workshop installation for a stereo supplied by Lehane: standard 2-hour labour allowance £160 + VAT (£192 including VAT). Subject to vehicle compatibility, existing faults, access and installation circumstances. Fitting kits, interfaces, any aerial hardware not expressly included, camera installation and any additional work are separate and must be agreed before proceeding. DAB aerial fitting, when selected with stereo installation, adds 0.5 hour labour at £40 + VAT (£48 including VAT). No customer-supplied parts. Contact us before ordering to confirm the vehicle, required parts and workshop appointment. For fitted orders, select Workshop collection / fitting appointment (free) in the basket or checkout. Buying installation does not reserve an appointment.

  • Installation option *

  • Available only with selected stereo installation for Lehane-supplied equipment. Labour only: £40 + VAT (£48 including VAT). Any required DAB aerial or adapters not expressly included with the stereo are priced separately and must be confirmed before ordering.

Find the right parts for your vehicle

Can't see your vehicle in the options on this page? Browse the categories below, then ask us to confirm the exact parts for your vehicle's make, model, year, dashboard, original radio and factory equipment. These are catalogue links, not a list of compatible parts. Do not add a component already included in a selected kit or option.

Product total

Options total

Grand total

SKU DMX7722DABS Category Brand:

Description

Kenwood DMX7722DABS 6.8-inch Wireless CarPlay & Android Auto Stereo

  • 6.8-inch capacitive touchscreen double-DIN media receiver
  • Wireless and wired Apple CarPlay and Android Auto with compatible phones
  • DAB+ digital radio and Bluetooth
  • 13-band equaliser and time alignment
  • Rear-camera input. Camera and vehicle integration adapters are separate

Check your vehicle before ordering

This is an aftermarket head unit, not a vehicle-specific plug-and-play kit. Your vehicle may require a fascia, wiring harness, aerial adapter, DAB antenna, steering-wheel-control interface, amplifier interface or camera-retention adapter. These are not included unless explicitly stated. Original factory functions are retained only where supported by the correct interface.

Compatible optional reversing cameras

Kenwood lists the CMOS-230 rear-view camera and CMOS-320 multi-view camera as compatible optional accessories for the DMX7722DABS. Choose one suitable camera for the intended rear-camera input; they are alternatives, not a requirement to buy both. Use the CMOS-320 supplied switch unit for camera-view selection unless the exact receiver control support has been confirmed.

Read the camera details before selecting it above, and do not order another separately if it is already selected. A new camera requires suitable mounting, cable routing, power, reverse-signal wiring and receiver setup. This does not retain an original factory camera. Camera fitting and extra parts are separate from standard stereo installation.

Professional installation

Choose supply only or optional standard workshop installation using the selector above. Standard stereo fitting at Lehane Autos, Swansea adds £160 + VAT (£192 including VAT) for a 2-hour labour allowance, subject to vehicle compatibility, existing faults, access and installation circumstances. Optional DAB aerial fitting with selected stereo installation adds £40 + VAT (£48 including VAT) for 0.5 hour of labour. Fitting kits, interfaces, any aerial hardware not expressly included, camera installation and work beyond the standard allowance are separate and must be agreed before proceeding. Contact us before ordering with the vehicle make, model, year and original stereo details to confirm the required parts, scope and workshop appointment. We fit equipment supplied by Lehane Autos; customer-supplied parts are not accepted. For fitted orders, select Workshop collection / fitting appointment (free) in the basket or checkout. Buying installation does not reserve an appointment. Supply-only delivery is calculated at checkout; collection requires confirmed stock and an appointment.

Workshop collection or UK delivery is available at checkout. Smartphone functions depend on a compatible phone, current software and the required connection.

UK price: £433.04 including VAT (£360.87 excluding VAT).

Additional information

Phone connection

Wireless or wired